|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
 ;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
;
Wow very wonderful and clear!!!! I will always trust them
DISASSEMBLY
1. TILT/SWIVEL & BACK COVER REMOVAL 1) Set the monitor face downward. 2) Carefully remove the Tilt/Swivel by pulling it upward. 3) Pressing the latch (a), Back cover by pushing it upward. (See Figure. 1) 4) Release the latch (c). (See Figure. 2 and Tip Spec.) 5) Slide the Back Cover away from the Front Cabinet of the monitor.
Figure. 1
Figure. 2
Back C over
(b)
Cabi net
(a)
Tip Spec. A(Width) : 5.0~15.0mm B(Depth) : 0.6~0.9mm C(Height) : 12.0mm
C A B
Tip
2. TOTAL CHASSIS ASSEMBLY REMOVAL 1) Set the monitor face downward. 2) Pressing the latch (a), Main Chassis by pushing it upward.
CDT
(a)
(a)
-9-
|
|
|
> |
|
|
Parse Time: 0.182 - Number of Queries: 131 - Query Time: 0.036
